|
Jim D. Gray & Associates, Inc. |
|
Supporting O.E.M.’s since 1977 |
|
SOLID STATE SOFT STARTER For 3-phase applications 1HP- 30HP 3A-30A
|
|
SOLID STATE SOFT STARTER SELECTOR TABLE
Extend motor & mechanical drive train life Adjustable torque, ramp-up & down time moderates hard starts an stops Reduced wear on belts, gears, chains, clutches & bearings Control motor in-rush Reduced water hammering in pumping applications Less shock to product on conveyor lines & material handling gear
Adjustable for a wide range of applications Adjustable ramp-up/down times (independent) 0.5-10Sec. (0.5-20 sec for bypass compatible models) Torque adjustment 0-85% of nominal torque with selectable kick start 200ms (break loose) function for high inertial loads Versions rated to operational voltage to 600VAc; current to 25/30A Trip class 10, 10A
Easy Installation Din-rail or screw mount Wide control voltage ranges
Reliable Unlimited number of start-stop operations per hour UL & cUL listed Meets EN 60947-4-2 IEC 947 compliant
Bypass versions available Integrated bypass control output for a contactor allows load to be switched to magnetic contactor, extending device life, increasing capacity and reducing heat Output status for bypass and start/stop at full rated current |
|
All versions are designed to be used with a manual motor starter or full voltage starter in order to provide necessary overload protection for the motor and provide line isolation for the motor. Short circuit protection can be provided by fuses or circuit breakers. |
|
972-699-9976 |